Why is the remove formaldehyde not lit? Best Guide
LED lights are now widely applied in our lives, because of their great features such as: saving electricity, having colorful light, diverse designs….However, in remove formaldehyde during the process of using, there will be many cases when you see that the LED is not bright, dim or blinks continuously.
So what is the cause of this phenomenon and how to fix the LED light does not light up? All will be shared shortly.
1. Why is the remove formaldehyde not lit?
LED lights are not bright if left for a long time, will not only cause discomfort but also directly affect your eyesight and health. Typically, LED lights fail for a number of reasons:
1.1. Due to the conductor
The cause of the wiring seems to be simple, but even professional electricians can sometimes get it. If you find your lamp is broken and are wondering why the LED remove formaldehyde is not on? Try to double check the wiring terminal system, the wires are correctly contacted, are the connectors installed correctly?
Next, if not at the junction, can you check to see if the wire has any breaks or open circuits? Or is it simply that any of the junctions are shorted together? Because during the installation process, sometimes there will be an excess of the connector and touching another connector, causing an electrical short.
LEDs can be damaged by wires
1.2. The LED does not light due to a broken LED chip
The remove formaldehyde LED chip can be said to be the heart and lung of the LED. Whether the LED is durable or not, whether the light is uniform or not is determined by this factor. Therefore, when the LED does not light, blinks continuously or has a dim light, the cause may be a damaged Led Chip.
1.3. Due to the power supply
The next reason we can mention here is the power supply. The mains supply is where the alternating current is converted into direct current, corresponding to the voltage of the type of LED you are using.
Your LED is not lit you can check your power supply. Damaged or poor quality power supplies, can be the cause of damage to your LEDs.
1.4. Due to the radiator
The final cause is your radiator. We all know that, when glowing, the heat that removes formaldehyde lamps in general and especially LED lights in particular, emit is very large.
Therefore, if your radiator has a problem, it will greatly affect your LED lights. The lamp will gradually heat up; work intermittently and eventually no longer light up.
Remove formaldehyde LEDs can be damaged due to radiators
- How to fix the LED light that doesn’t light up or flickers
After knowing the reason why you’re LED is not lit or is flickering. Let’s learn more about how to fix Led lights from A to Z for each case. Usually, how to fix decorative led bulbs or how to fix 1m2 Led bulbs are almost the same.
2.1. How to fix damaged LED bulbs due to wires?
If your remove formaldehyde LED does not light up because of the power cord, you can completely review the installation instructions yourself. Reconnect the cord or replace it with a new one if the problem is a damaged cord.
However, during all the inspection and replacement of the power cord, you need to remember to disconnect the power first. If you are an amateur, you can ask an experienced person or ask an electrician to avoid unwanted consequences.
Thanks to the electricians who have expertise in repairing LED lights
2.2. How to repair LED lights when the chip is broken?
If the Led Chip is damaged, we can replace the Chip with a new one or skip that Chip to connect to the next circuit. This will depend on the structure and connection of each different lamp.
In case of repair of remove formaldehyde light due to chip damage, you should ask an electrician or someone with expertise, to avoid damaging other related parts.
2.3. How to fix the LED bulb that does not light due to the power supply?
If it’s the power supply, you need to fix it immediately. Or you can use another power supply instead.
But note, it is necessary to use quality power supplies, avoid using poor quality goods or goods that are too old. Not only does this not solve the problem of the lights not coming on, but it sometimes causes both the new power supply and the lamp to fail.
Buy or replace a new power supply if this is the cause of the remove formaldehyde LED failure
2.4. How to fix the remove formaldehyde LED light?
What to do if this is the case is to repair the radiator to enhance the ability to cool down the semiconductor diode. If the machine cannot be repaired, consider buying a new radiator to make sure the lights work well and no problems arise.
3. Tips to help LED lights work stably
When it comes to buying and installing remove formaldehyde LED lights for use, we all want them to perform well for a long time. Understanding that mentality, let’s go together to learn some tips to help LED lights have a longer and more stable life.
3.1. Choose to buy LED lights at Abovelight
This seems like everyone knows it, but not many people do it. The problem is that there are too many attractive ads these days. Besides, the price is cheaper and more competitive. That is why many people have chosen to buy because of advertising, because of cheap price instead of quality.
To ensure stable and long-term operation of the lights, you should calculate before deciding to invest. Please choose reputable addresses to buy, check product information carefully to make the best decision.
3.2. Calculating the choice of using inappropriate decorative lights
Remove formaldehyde LED lights have become indispensable lighting devices in every home. When completing the work, the homeowner must calculate the lighting and find a way to arrange the lights in the house to both save energy and meet the needs of use
